Figure 52. Paddle assembly, removal and installation.
c. Install the gear reducer assembly (TM 5-
174. Paddle Assembly Cleaning
a n d Inspection
3820-205-20/1).
C l e a n all parts in an approved cleaning sol-
d. Install the power cable reel assembly (TM
v e n t . Inspect the paddle assembly for defects
5-3820-205-20/1).
or damage. Replace a defective or damaged
paddle.
1 7 3 . Paddle Assembly Removal
1 7 5 . Paddle Assembly Installation
Refer to figure 52, and remove the paddle
Refer to figure 52, and install the paddle
assembly from the unit.
assembly on the unit.
Section II. ELEVATOR WHEEL ASSEMBLY
an electrical motor and travels on four rubber
1 7 6 . General
trunnions.
The elevator wheel assembly is equipped with
12 paddles which pick up the material from
177. Elevator Wheel Assembly Removal
the under conveyor and dumps it into the feed
a. Remove the rotary elevator assembly
conveyor. T h e elevator wheel is powered by
( p a r . 32).
AGO 8498A