Figure 48. Under conveyor tail pulley, exploded view.
(5) Adjust the conveyor belt (TM 5-
154. Under Conveyor Tail Pulley
3820-205-10/1).
R e a s s e m b l y and Installation
a. Reassembly. Refer to figure 48, and re-
1 5 5 . Under Conveyor Head Pulley Removal
assemble the under conveyor tail pulley in the
and Disassembly
r e v e r s e order.
a . Removal.
b . Installation.
( 1 ) Remove the rotary elevator assembly
(1) Refer to figure 47, and install the
( p a r . 32).
under conveyor tail pulley on the unit.
( 2 ) Remove the belt scraper (TM 5-3820-
( 2 ) Install the under conveyor belt (par.
205-20/1).
132).
(3) Remove the under conveyor belt (par.
(3) Using a suitable lifting device, lift the
130).
under conveyor and install the support
pin.
(4) Refer to figure 49, and remove the
u n d e r conveyor head pulley from the
( 4 ) Lubricate the shaft bearings (LO 5-
unit.
3820-205-20/1).
AGO 8498A
98