b.
Installation.
(1)
Using a suitable lifting device and
slings, position the pan feeder
assembly on the crusher frame.
(2)
Refer to figure 2 and install the pan
feeder mounting brackets on the unit.
(3)
Connect the hydraulic cylinder to the
pan feeder (TM 5-3820-205-20/2).
(4)
Install the clearance lights, conduit,
and reflectors (TM 5-3820-20520/2).
(5)
Install the pan feeder drive motor and
conduit (TM 5-3820-205-20/2).
32. Scalper Vibrating Screen Assembly a. Removal.
(1) Remove the scalper vibrating screen
drive motor and belts (TM 5-3820-
205-20/2).
(2) With the pan feeder assembly in the
lowered position, refer to figure 3 and
loosen the scalper vibrating screen
Figure 2.
assembly.
(3) Refer to figure 3 and remove the
(3)
Connect the battery leads to the
scalper vibrating screen.
engine (TM 5-382-205-20/2).
(4)
Position the drive belts on the engine
b.
Installation.
sheave and adjust tension (TM 5-
(1) Using a suitable lifting device and
3820-205-20/2).
slings, position the scalper vibrating
(5)
Install the drive belt guard (TM 5-
screen assembly on the diagonal
3820-205-20/2).
support.
(2) Refer to figure 3 and secure the
31. Pan Feeder Assembly
scalper vibrating screen assembly on
a.
Removal.
the diagonal support.
(1) Remove the pan feeder drive motor
(3) Install the scalper vibrating screen
and conduit (TM 5-3820-205-20/2).
drive motor and belts (TM 5-3820-
(2) Remove the clearance lights, conduit,
205-20/2).
and reflectors (TM 5-3820-205-20/2).
(3) Disconnect the hydraulic cylinder from
33. Crusher Assembly
the pan feeder (TM 6-3820-2020/2).
a.
Removal.
(4) Refer to figure 2 and remove the pan
(1) Remove the upper operator's platform
feeder mounting brackets.
and ladders (TM 5-3820-205-20/2).
(5) Using a suitable lifting device and
(2) Remove the crusher unit drive belt
slings, remove the pan feeder
guards (TM 5-3820-205-20/2).
assembly.
(3) Loosen the engine adjustment and
remove the drive belts from the engine
AGO 8456
18