Section IV. FEEDER DRIVE GEAR ASSEMBLY
(1) Inspect the drive gears for broken or chipped
128. General
teeth.
The feeder drive gear assembly receives power from
(2) Inspect the gear housing and cover for holes,
the transfer shaft of the gear reducer assembly and
dents, and elongated mounting holes.
supplies power to the drive shaft and sprockets on the
pan feeder drive end.
(3) Inspect keys for wear in the gear keyway.
129. Feeder Drive Gear Assembly Removal
(4) Inspect all mounting hardware for defective
threads. Replace all defective hardware.
Refer to figure 39 and remove the feeder drive gear
assembly.
(5) Replace all gaskets.
130. Feeder Drive Gear
Assembly
Cleaning,
(6) Replace all defective parts as necessary.
Inspection, and Repair
131. Feeder Drive Gear Assembly Installation
a. Cleaning.
Clean all parts with an approved
cleaning solvent and dry thoroughly.
Refer to figure 39 and install the feeder drive gear
assembly on the unit.
b. Inspection and Repair.
78 AGO 8456A
