(3) Replace or repair all defective parts as
(2) Remove the grease or oil from the belt
necessary.
with an approved cleaning solvent. Dry
thoroughly.
175. Discharge Conveyor Belt Installation
b. Inspection and Repair.
a. Refer to figure 53 and install the conveyor belt
on the unit.
(1) Inspect the belt for cuts, breaks, slashes,
or perforation.
b. Adjust the conveyor belt (TM 5-3820-205-20/2).
(2) Inspect the fastener set for cracks,
breaks, wear, loose, or ripped mounting.
Section II. DISCHARGE CONVEYOR DRIVE MOTOR ASSEMBLY
176. General
178. Discharge Conveyor Drive Motor Assembly
Cleaning, Inspection, and Repair
For a detailed description of the discharge
conveyor drive motor assembly refer to paragraph 116.
For complete cleaning, inspection, and repair of
the drive motor assembly refer to paragraph 118.
177. Discharge Conveyor Drive Motor Assembly
Removal and Disassembly
179. Discharge Conveyor Drive Motor Assembly,
Reassembly and Installation
a. Remove. Remove the drive motor assembly
and support (TM 5-3820-205-20/2).
a. Reassembly. For the complete reassembly of
the drive motor assembly refer to paragraph 119.
b. Disassembly.. For the complete disassembly of
the drive motor assembly refer to paragraph 117.
b. Installation. Install the support and drive motor
assembly (TM 5-3820-205-20/2).
Section III. CONVEYOR GEAR REDUCER ASSEMBLY
180. General
182. Conveyor Gear Reducer Assembly Cleaning,
Inspection, and Repair
For a detailed description of the conveyor gear
reducer assembly refer to paragraph 124.
For the complete cleaning, inspection, and repair
of the gear reducer assembly refer to paragraph 126.
181. Conveyer Gear Reducer Assembly Removal,
and Disassembly
183. Conveyor Gear Reducer Assembly Reassembly
and Installation
a. Removal. Remove the gear reducer assembly
a. Reassembly. For the complete reassembly of
the conveyor gear reducer assembly refer to paragraph
b. Disassembly. For the complete disassembly of
the conveyor gear reducer assembly refer to paragraph
b. Installation. Install the conveyor gear reducer
assembly (TM 5-3820-205-20/2).
AGO 3456A
103