TM 5-3820-233-12/1
b. Inspection.
4-45. Side Panels and Hood
(1) Inspect the latches for damage or defects.
a. Removal. Refer to figure 4-30 and remove the
(2) Inspect hood, hood supports, or side panels
side panels and hood as follows:
for damage.
(1) Unlatch the side panel clamp (19, fig. 4-31).
(3) Inspect base (25, fig. 4-31) for cracks or
(2) Pull side panels (1) down and out.
damage.
(3) Remove muffler and aspirator (para 4-44).
(4) Inspect all hardware for missing or broken
(4) Disconnect starting aid (para 4-17).
pieces. Replace a defective part.
(5) Remove radiator cap.
c. Installation. Installation is the reverse procedure
(6) Remove bolts on hood and remove hood (fig.
of removal.
(7) Disconnect tie rods (fig. 4-30C) and lift off the
hood support assemblies.
4-30
