TM 5-3820-233-12/1
and fraying.
4-46. Instrumental Panel
(2) Inspect all instruments for improper operation
a. General. The controls and instruments are
or broken glass.
described, located and illustrated in paragraphs 2-7 and
(3) Inspect the hourmeter tachometer drive for a
defective drive cable. Replace a defective gage, drive
about the various instruments for proper operation of the
cable or damaged wiring.
jaw crusher.
d. Installation. Refer to figure 4-32 and install the
b. Removal. Refer to figure 4-32 and remove the
instruments and electrical wiring and instruments.
electrical wiring and instruments.
c. Inspection
(1) Inspect the electrical wiring for cuts, damage
Figure 4-32. Instruments, removal and installation.
4-35
