TM 5-3820-233-35/2
(c) Screen
vibrating
unit-to-screen
countershaft drive V-belts.
(d) Roll crusher drive V-belts.
(e) Main countershaft-to-lower
countershaft V-belts.
(7) Refer to figure 8 and remove test
vibrating screen.
b. Installation
(1) Refer to figure 8 and install the vibrating
screen.
(2) Complete the vibrating screen installation
in the reverse numerical sequence as discussed under
"Vibrating Screen Removal."
STEP 1. DISCONNECT CONVEYOR HEAD
(3) Refer to the Operator's Manual and make
TOP SUPPORTS FROM CONVEYOR
the proper belt tension adjustments.
HEAD BOTTOM SUPPORTS.
28. Roll Crusher
Figure 6 (1). Overhead conveyor, renal and
a. Removal
installation
(1) Remove
the overhead
conveyor
belt
and
intermediate frame (para 25).
STEP 2. DISCONNECT INTERMEDIATE
STEP 3. DISCONNECT HEAT FRAME FROM
FRAME FROM TAIL FRAME AND
BOTTOM SUPPORTS AND REMOVE
HEAD FRAME, AND REMOVE
HEAD FRAME.
FROM PLANT.
Figure 6 (2)-Continued.
2-9
