TM 5-3820-233-35/2
STEP 1.
DISCONNECT DRIVE SHAFT
COUPLING FROM TRUNNION
SHAFT.
STEP 2.
DISCONNECT ELEVATING WHEEL
FRONT SUPPORTS.
STEP 5.
DISCONNECT ELEVATING WHEEL
Figure 7 (1). Elevating wheel, removal and
SUPPORT FRAME.
installation.
STEP 6.
USE A SUITABLE LIFTING DEVICE
WITH A CAPACITY OF 3300
POUNDS AND REMOVE ELEVAT-
ING WHEEL ASSEMBLY.
Figure 7 (3)-Continued
STEP 1.
REMOVE STEP-ON GUARD.
STEP 3.
DISCONNECT WIRE HARNESS.
STEP 2.
REMOVE CONVEYOR HEAD BOT-
STEP 4.
DISCONNECT TAIL FRAME FROM
TOM SUPPORTS.
INTERMEDIATE FRAME.
STEP 3.
REMOVE THE MAIN COUNTER-
SHAFT ASSEMBLY.
Figure 7 (2)Continued.
Figure 8 (1). Vibrating screen, removal and
installation
(2) Remove the elevating wheel assembly
(2) Install the elevating wheel assembly (para
(3) Refer to figure 9 and remove the roll
crusher.
(3) Install
the
overhead
conveyor
b. Installation
intermediate frame (para 25).
(1) Refer to figure 9 and install the roll
(4) Refer to the Operator's Manual and adjust
crusher.
V-belts.
2-10
