152. Diverter Box, Chutes, and Gate
a. Removal. Remove the diverter box and coarse chute as instructed on figure 80.
b. Disassembly. Disassemble the diverter box, chutes, and gate as illustrated on figure 81.
c. Cleaning, Inspection, and Repair. Clean and inspect all parts. Repair or replace worn or defective parts as
required.
d. Reassembly. Reassemble the diverter box, chutes, and gate as illustrated on figure 81.
e. Installation. Install the diverter box and coarse chute in reverse of instructions on figure 80.
A-Diverter box installed
B-Coarse chute installed
Figure 80. Diverter box and coarse chute, removal and installation.
AGO 8156A
103
