A - Camshaft gear installed view
B - Camshaft gear and camshaft installed view
Figure 24. Timing gears and end plate assembly, removal and installation.
Refer to figure 23 and install the timing gear
Install the
injection
pump
drive
gear
e.
g.
cover on the engine.
assembly (par. 71).
Install the vibration damper and drive pulley
Install the engine housing (TM 5-3820205-
f.
h.
20/2).
Section XIV. ENGINE OIL PAN
access cover plate which contains a magnet for the
88. General
purpose of removing particles of steel from the oil.
The oil pan assembly is mounted on the bottom of
89. Engine Oil Pan Removal and Disassembly
the engine block and serves as a cover for the
crankshaft, main bearings, and connecting rod bearings,
a.
Removal.
and a reservoir for the engine lubricating oil. The
(1)
Remove the engine assembly (par.
access cover plate is part of the oil pan assembly; it
allows access to the lubricating oil pump screen and the
(2)
Remove the engine housing (TM 5-
lubricating oil pressure relief valve without the removal
3820-205-20/2).
of the entire pan assembly. There is a drain plug in the
AGO 3456A
58
