TM 5-3820-233-35/2
and depot maintenance personnel performing major
6.
Direct and General Support and Depot
overhaul work on the Portable Secondary Crushing and
Maintenance Repair Parts
Screening Plant. The tool listed in Table 4 is not
Direct and General Support and Depot Maintenance
available for issue, but must be fabricated by qualified
Repair Parts are listed and illustrated in TM 54-820-233-
direct and general support and depot maintenance
45P.
personnel.
No specially designed equipment is
required.
7. Specially Designed Tools and Equipment
The specially designed tool illustrated in figure 2 and
listed in Table 4 is for direct support and general support
Table 4. Specially De8igned Tools and Equipment
Reference
Item
Figure
Paragraph
Use
Roll shell assembly tool
Assembly of roll sheets
Section II. TROUBLESHOOTING
8. General
Each trouble stated is followed by a list of probable
causes of trouble. The possible remedy recommended
This section provides information useful in diagnosing
is described opposite the probable cause.
and correcting unsatisfactory operation or failure of the
crushing and screening plant or any of its components.
Figure 2. Specially designed tool.
2-2
