20 --Continued.
Figure
form polishing and if any defects are
(4) Inspect the transfer pump blades care-
noted, replace both sides.
fully for chipping or damage. Deter-
( 5 ) Measure the tang of the drive shaft
m i n e wear by measuring the length
for proper distance across data 0.305
with a micrometer; the minimum
i n c h minimum. R e p l a c e the drive
length allowable is 1.0930 inches. In-
shaft if defective.
s p e c t flat surfaces visually for uni-
54
AGO 8498A