TM 5-3820-233-12/1
Figure 4-3. Fuel injector, removal and installation.
injector as follows:
CAUTION
(1) Insert the injector into injector tube with dowel
Do not bend fuel pipes or exceed
positioned with the locating hole in the cylinder head.
specified torque. Excessive tighten-
(2) Side rack control lever over so that it registers
with the injector rack.
causing leaks. Lubricating oil diluted
(3) Place injector clamp in place and install special
by fuel oil can cause serious damage
washer. Install bolt and tighten to 20-25 lb-ft. torque.
e. Installation. Refer to figure 4-3 and install the fuel
4-6