TM 5-3820-233-12/2
Figure 4-17. Oil pressure switch, removal and installation.
fuel pressure switch.
4-31. Fuel Pressure Switch
c. Inspection.
a. General. The fuel oil pressure switch is located on
(1) Inspect all wiring for fraying or cracks.
the right side of the engine above the fuel strainer (fig. 4-
(2) Replace defective parts.
d. Installation. Install the fuel oil pressure switch in
b. Removal.
reverse order of removal.
(1) Disconnect all electrical wiring.
(2) Disconnect elbow and brushing and remove
Figure 4-18. Fuel pressure and water temperature switch, removal and installation.
4-18
