TM 5-3820-233-12/2
d. Main Countershaft to Roll Crusher Flywheel. Refer
c. Flywheel to Elevating Wheel and Undercrusher
Conveyor Countershaft. Refer to figure 4-52 and adjust the
to figure 4-51 and adjust the main countershaft to roll
crusher flywheel V-belt as follows:
flywheel to elevating wheel and undercrusher conveyor
(1) Loosen jab nut (2).
countershaft V-belt as follows:
(2) Turn adjusting screw to increase or decrease V-
(1) Loosen jam nut (2) in torque arm.
belt tension.
(2) Adjust torque arm to increase or decrease V-belt
(3) Tighten jam nut (2).
tension.
(3) Tighten jam nut (2).
Figure 4-52. Flywheel to elevating wheel and undercrusher.
Figure 4-51. Main countershaft to roll crusher flywheel
conveyor countershaft V-belt adjustment. V-belt adjustment.
4-42
